Tap Connector

Tap Connector

£4.25

3/8 push fit x 1/2 BSP female.  A typical use for this fitting would be to convert a barb and tail on the back of most stainless tap shanks into a 3/8 push fit.  A simple reducer will then reduce the 3/8 pushfit down to your chosen pipe size. The picture shows the Tap Connector fitted to the shank of a tap and also a 1/4 reducer (not supplied).

Also available as 3/8 push fit x 5/8 BSP Female. 

 

Please check the size of the thread onto which this will be fitted.

3/8 Push x 1/2 BSP £4.25  Qty req: 
3/8 Push x 5/8 BSP £4.25  Qty req: 
question
 


Tap Connector 2

Other Cornelius Kegs, Spares & John Guest Fittings

Carbonation, Line Cleaning and Counter Pressure Filler Cap
Carbonation, Line Cleaning and Counter Pressure Filler Cap
JG Shut Off Valve
JG Shut Off Valve
JG Splitters
JG Splitters
Cornelius O ring Valve Post
Cornelius O ring Valve Post
Cornelius Keg
Cornelius Keg
JG Reducing Straight Connectors
JG Reducing Straight Connectors
JG Gas Regulator Fitting
JG Gas Regulator Fitting
JG Straight Connectors
JG Straight Connectors
JG Blanking Plug
JG Blanking Plug
Cornelius Pressure Relief Valve
Cornelius Pressure Relief Valve